Phone: 970-241-8517
Menu

2010 Volvo Penta Diesel Inboard D2-55

or
Call 970-241-8517
Get Financing

Description

Electrical System

  • 115A marine alternator
  • 12V corrosion-protected electrical system
  • Charging regulator with electronic sensor for voltage drop compensation
  • Electric starter motor (2.0 kW output)
  • Electrical stop
  • Extension cable harness with plug-in connection available in various lengths
  • Glow plugs for excellent cold starting

    • Electrical System Options

  • 24V alternator

    • Lubrication System

  • Auxiliary stop button on engine
  • Closed circuit crankcase ventilation
  • Feed pump with hand primer
  • Flange mounted, cam driven in-line injection pump
  • One top and one side oil filling position
  • Separate oil scavenger pipe
  • Spin-on fullflow oil filter
  • Spin-on type fine fuel filter

    • Accessories Options

  • Battery and battery switches
  • Chemical products - paints, oils, cleaners etc.
  • Cooling water seacocks, strainers and hoses.
  • Electronic shift and throttle
  • Engine controls and steering systems
  • Exhaust systems and hull fittings
  • Extra alternator kits
  • Fuel systems including filters, pipes etc.
  • Hot water systems
  • Propeller shaft systems and propellers
  • Pulleys and universal brackets for power take-off (PTO)
  • Separate expansion tanks

    • Engine Specifications

  • Bore (in.): 3.31
  • Compression Ratio: 23.3:1
  • Crankshaft Power, kW (hp): 41 (55)
  • Cylinder Configuration: 4
  • Displacement (cu. in.): 134
  • Dry Weight w/Reverse Gear HS25A/MS25(kg/lb.): 249/243 (549/536)
  • Dry Weight w/Sail Drive 130S/SR (kg/lb.): 253 (558)
  • Engine: D2-55F
  • Max Engine Speed (RPM): 2700-3000
  • Operation: 4-stroke
  • Power (hp): 53
  • Production Period: 2008-
  • Propeller Shaft Power, kW (hp): 39 (53)
  • Stroke (in.): 3.94

    • Engine Block And Head

  • Chrome molybdenum forged crankshaft, statically and dynamically balanced with integral counterweights. Pistons are cast from high silicon aluminum, are heat treated and fitted with two cast iron, chromium faced compression rings and a single oil ring.
  • Cylinder block and cylinder head manufactured from high grade cast iron. Crankcase features a rigid tunnel block design.
  • Elastic coupling on flywheel
  • Replaceable, hardened valve seats

    • Cooling System

  • Easily accessible sea water pump and impeller
  • Freshwater cooling system governed by thermostat
  • Tubular heat exchanger with integral expansion tank

    • Exhaust System

  • Freshwater cooled exhaust manifold and seawater cooled exhaust elbow

    • Choice Of Transmissions

  • HS25A Hydraulic - Drop center with 8° down angled output shaft. Trolling valve kit available. Ratio 2.29:1/2.29:1 (RH/LH) and 2.71:1/2.71:1 (RH/LH)
  • MS25A Mechanical - Drop center with 8° down angled output shaft. Ratio 2.23:1/2.74:1 (RH/LH) and 2.74:1/2.74:1 (RH/LH)
  • MS25L Mechanical - Drop center with straight output shaft. Ratio 2.27:1/2.10:1 (RH/LH) and 2.74:1/2.72:1 (RH/LH)
  • S-drive 130S and 130SR for reverse installation of engine. Ratio 2.19:1.

    • Evc Instruments Options

  • LCD display with multisensor
  • NMEA interface presenting engine data on chart plotters
  • Separate instruments for: Fuel level; Temperature; Voltage

    • Evc Instruments

  • Start/stop panel
  • Tachometer with alarms and engine hour counter

    • Engine Mounting

  • Tuned front and rear cushion-type rubber mounts. Adjustable.

    • Electrical System

  • 115A marine alternator
  • 12V corrosion-protected electrical system
  • Charging regulator with electronic sensor for voltage drop compensation
  • Electric starter motor (2.0 kW output)
  • Electrical stop
  • Extension cable harness with plug-in connection available in various lengths
  • Glow plugs for excellent cold starting

    • Electrical System Options

  • 24V alternator

    • Lubrication System

  • Auxiliary stop button on engine
  • Closed circuit crankcase ventilation
  • Feed pump with hand primer
  • Flange mounted, cam driven in-line injection pump
  • One top and one side oil filling position
  • Separate oil scavenger pipe
  • Spin-on fullflow oil filter
  • Spin-on type fine fuel filter

    • Accessories Options

  • Battery and battery switches
  • Chemical products - paints, oils, cleaners etc.
  • Cooling water seacocks, strainers and hoses.
  • Electronic shift and throttle
  • Engine controls and steering systems
  • Exhaust systems and hull fittings
  • Extra alternator kits
  • Fuel systems including filters, pipes etc.
  • Hot water systems
  • Propeller shaft systems and propellers
  • Pulleys and universal brackets for power take-off (PTO)
  • Separate expansion tanks

    • Engine Specifications

  • Bore (in.): 3.31
  • Compression Ratio: 23.3:1
  • Crankshaft Power, kW (hp): 41 (55)
  • Cylinder Configuration: 4
  • Displacement (cu. in.): 134
  • Dry Weight w/Reverse Gear HS25A/MS25(kg/lb.): 249/243 (549/536)
  • Dry Weight w/Sail Drive 130S/SR (kg/lb.): 253 (558)
  • Engine: D2-55F
  • Max Engine Speed (RPM): 2700-3000
  • Operation: 4-stroke
  • Power (hp): 53
  • Production Period: 2008-
  • Propeller Shaft Power, kW (hp): 39 (53)
  • Stroke (in.): 3.94

    • Engine Block And Head

  • Chrome molybdenum forged crankshaft, statically and dynamically balanced with integral counterweights. Pistons are cast from high silicon aluminum, are heat treated and fitted with two cast iron, chromium faced compression rings and a single oil ring.
  • Cylinder block and cylinder head manufactured from high grade cast iron. Crankcase features a rigid tunnel block design.
  • Elastic coupling on flywheel
  • Replaceable, hardened valve seats

    • Cooling System

  • Easily accessible sea water pump and impeller
  • Freshwater cooling system governed by thermostat
  • Tubular heat exchanger with integral expansion tank

    • Exhaust System

  • Freshwater cooled exhaust manifold and seawater cooled exhaust elbow

    • Choice Of Transmissions

  • HS25A Hydraulic - Drop center with 8° down angled output shaft. Trolling valve kit available. Ratio 2.29:1/2.29:1 (RH/LH) and 2.71:1/2.71:1 (RH/LH)
  • MS25A Mechanical - Drop center with 8° down angled output shaft. Ratio 2.23:1/2.74:1 (RH/LH) and 2.74:1/2.74:1 (RH/LH)
  • MS25L Mechanical - Drop center with straight output shaft. Ratio 2.27:1/2.10:1 (RH/LH) and 2.74:1/2.72:1 (RH/LH)
  • S-drive 130S and 130SR for reverse installation of engine. Ratio 2.19:1.

    • Evc Instruments Options

  • LCD display with multisensor
  • NMEA interface presenting engine data on chart plotters
  • Separate instruments for: Fuel level; Temperature; Voltage

    • Evc Instruments

  • Start/stop panel
  • Tachometer with alarms and engine hour counter

    • Engine Mounting

  • Tuned front and rear cushion-type rubber mounts. Adjustable.

    • Electrical System

  • 115A marine alternator
  • 12V corrosion-protected electrical system
  • Charging regulator with electronic sensor for voltage drop compensation
  • Electric starter motor (2.0 kW output)
  • Electrical stop
  • Extension cable harness with plug-in connection available in various lengths
  • Glow plugs for excellent cold starting

    • Electrical System Options

  • 24V alternator

    • Lubrication System

  • Auxiliary stop button on engine
  • Closed circuit crankcase ventilation
  • Feed pump with hand primer
  • Flange mounted, cam driven in-line injection pump
  • One top and one side oil filling position
  • Separate oil scavenger pipe
  • Spin-on fullflow oil filter
  • Spin-on type fine fuel filter

    • Accessories Options

  • Battery and battery switches
  • Chemical products - paints, oils, cleaners etc.
  • Cooling water seacocks, strainers and hoses.
  • Electronic shift and throttle
  • Engine controls and steering systems
  • Exhaust systems and hull fittings
  • Extra alternator kits
  • Fuel systems including filters, pipes etc.
  • Hot water systems
  • Propeller shaft systems and propellers
  • Pulleys and universal brackets for power take-off (PTO)
  • Separate expansion tanks

    • Engine Specifications

  • Bore (in.): 3.31
  • Compression Ratio: 23.3:1
  • Crankshaft Power, kW (hp): 41 (55)
  • Cylinder Configuration: 4
  • Displacement (cu. in.): 134
  • Dry Weight w/Reverse Gear HS25A/MS25(kg/lb.): 249/243 (549/536)
  • Dry Weight w/Sail Drive 130S/SR (kg/lb.): 253 (558)
  • Engine: D2-55F
  • Max Engine Speed (RPM): 2700-3000
  • Operation: 4-stroke
  • Power (hp): 53
  • Production Period: 2008-
  • Propeller Shaft Power, kW (hp): 39 (53)
  • Stroke (in.): 3.94

    • Engine Block And Head

  • Chrome molybdenum forged crankshaft, statically and dynamically balanced with integral counterweights. Pistons are cast from high silicon aluminum, are heat treated and fitted with two cast iron, chromium faced compression rings and a single oil ring.
  • Cylinder block and cylinder head manufactured from high grade cast iron. Crankcase features a rigid tunnel block design.
  • Elastic coupling on flywheel
  • Replaceable, hardened valve seats

    • Cooling System

  • Easily accessible sea water pump and impeller
  • Freshwater cooling system governed by thermostat
  • Tubular heat exchanger with integral expansion tank

    • Exhaust System

  • Freshwater cooled exhaust manifold and seawater cooled exhaust elbow

    • Choice Of Transmissions

  • HS25A Hydraulic - Drop center with 8° down angled output shaft. Trolling valve kit available. Ratio 2.29:1/2.29:1 (RH/LH) and 2.71:1/2.71:1 (RH/LH)
  • MS25A Mechanical - Drop center with 8° down angled output shaft. Ratio 2.23:1/2.74:1 (RH/LH) and 2.74:1/2.74:1 (RH/LH)
  • MS25L Mechanical - Drop center with straight output shaft. Ratio 2.27:1/2.10:1 (RH/LH) and 2.74:1/2.72:1 (RH/LH)
  • S-drive 130S and 130SR for reverse installation of engine. Ratio 2.19:1.

    • Evc Instruments Options

  • LCD display with multisensor
  • NMEA interface presenting engine data on chart plotters
  • Separate instruments for: Fuel level; Temperature; Voltage

    • Evc Instruments

  • Start/stop panel
  • Tachometer with alarms and engine hour counter

    • Engine Mounting

  • Tuned front and rear cushion-type rubber mounts. Adjustable.

    • Specifications

    ManufacturerVolvo Penta
    ModelDiesel Inboard D2-55
    Year2010
    ConditionNew
    Engine TypeD2-55F
    Horsepower53
    Displacement134